ISO standartų sąrašas

Visi ISO standartai nuo 1 iki 80000.

 

ISO 1 ISO 999

* ISO 1 Geometrical Product Specifications (GPS) Standard reference temperature for geometrical product specification and verification

* ISO 2 Textiles Designation of the direction of twist in yarns and related products

* ISO 3 Preferred numbers Series of preferred numbers

* ISO 4 Information and documentation Rules for the abbreviation of title words and titles of publications

* ISO 5 Photography and graphic technology Density measurements

* ISO 6 Photography Black-and-white pictorial still camera negative film/process systems Determination of ISO speed

* ISO 7 Pipe threads where pressure-tight joints are made on the threads

* ISO 8 Documentation Presentation of periodicals

* ISO 9 Information and documentation Transliteration of Cyrillic characters into Latin characters Slavic and non-Slavic languages

* ISO 11 Aircraft Ground pressure testing connections for pressure cabins

* ISO 12 Aerospace Pipelines Identification

* ISO 13 Grey iron pipes, special castings and grey iron parts for pressure main lines [withdrawn 2004-07-19]

* ISO 14 Straight-sided splines for cylindrical shafts with internal centering Dimensions, tolerances and verification

* ISO 16 Acoustics Standard tuning frequency (Standard musical pitch)

* ISO 17 Guide to the use of preferred numbers and of series of preferred numbers

* ISO 18 Documentation Contents list of periodicals

* ISO 31 Quantities and units

* ISO 65 Carbon steel tubes suitable for screwing in accordance with ISO 7-1[2]

* ISO 68-1 ISO general purpose screw threads Basic profile Part 1: Metric screw threads[3]

* ISO 68-2 ISO general purpose screw threads Basic profile Part 2: Inch screw threads

 

* ISO 128 Technical drawings General principles of presentation

* ISO 216 paper sizes, e.g. the A4 paper size

* ISO 226 Phon based on Fletcher-Munson curves

o ISO 226:2003 Phon based on newer Equal-loudness contours

* ISO 228-1: Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation

* ISO 233:1984 Transliteration of Arabic characters into Roman characters

o ISO 233-2:1993 Transliteration of Arabic characters into Roman characters Part 2: Arabic language Simplified transliteration

* ISO 259:1984 Documentation Transliteration of Hebrew characters into Roman characters

o ISO 259-2:1994 Transliteration of Hebrew characters into Roman characters Part 2: Simplified transliteration

* ISO 261 General purpose metric screw threads. General plan

* ISO 262 Selected metric-screw-thread sizes for screws, bolts, and nuts

* ISO 361 Basic ionizing radiation symbol

* ISO 500 Agricultural tractors Rear-mounted power take-off

* ISO 639 Codes for the representation of names of languages

o ISO 639-1 Codes for the representation of names of languages Part 1: Alpha-2 code

o ISO 639-2 Codes for the representation of names of languages Part 2: Alpha-3 code

o ISO 639-3 Codes for the representation of names of languages Part 3: Alpha-3 code for comprehensive coverage of languages

o ISO 639-5 Codes for the representation of names of languages Part 5: Alpha-3 code for language families and groups

* ISO/IEC 646 internationalized 7 bit ASCII variants

* ISO 657 Hot-rolled steel sections

* ISO 668 Series 1 freight containers Classification, dimensions and ratings

* ISO 690 bibliographic references

* ISO 704 Terminology work - Principles and methods

* ISO 732 Photography 120-size and 220-size films Dimensions

* ISO 764 Horology Magnetic resistant watches

* ISO 838 Standard for punching filing holes into paper

* ISO 843:1997 Conversion of Greek characters into Roman characters

* ISO 860 Terminology work -- Harmonization of concepts and terms

* ISO 898 Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel

o ISO 898-1 Bolts, screws and studs with specified property classes Coarse thread and fine pitch thread

o ISO 898-2 Nuts with specified proof load values Coarse thread

o ISO 898-5 Set screws and similar threaded fasteners not under tensile stresses

o ISO 898-6 Nuts with specified proof load values Fine pitch thread

o ISO 898-7 Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

* ISO 965 General purpose metric screw threads Tolerances

o ISO 965-1 Principles and basic data

o ISO 965-2 Limits of sizes for general purpose external and internal screw threads

o ISO 965-3 Deviations for constructional screw threads

o ISO 965-4 Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing

o ISO 965-5 Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing

* ISO 999 Guidelines for the content, organization, and presentation of indexes

ISO 1000 ISO 9999

* ISO 1000 SI units and recommendations for the use of their multiples and of certain other units

* ISO 1004 Magnetic ink character recognition

* ISO 1007 135 film format

* ISO 1028 Information processing - Flowchart symbols

* ISO/IEC 1539 Fortran programming language

* ISO 1629 Establishes a system of terms and nomenclature for polymers

* ISO 1745 Information processing Basic mode control procedures for data communication systems

* ISO 1750 Pesticides and other agrochemicals Common names

* ISO 1789 Medical vehicles and their equipment. Road ambulances

* ISO/IEC 2022 Information technology: Character code structure and extension techniques

* ISO 2108 International standard book numbering (ISBN)

* ISO 2145 Numbering of divisions and subdivisions in written documents

* ISO 2162 Technical product documentation -- Springs -- Part 1: Simplified representation

* ISO 2171 Cereals and milled cereal products Determination of total ash

* ISO 2242 Photography -- Light sources for use in sensitometric exposure -- Simulation of the spectral distribution of photoflood illumination

* ISO 2281 Water-resistant watches

* ISO 2533 Standard Atmosphere

* ISO 2636 Information processing Conventions for incorporating flowchart symbols in flowcharts

* ISO 2709 Format for information exchange (e.g. MARC)

* ISO 2768 Standard for dimensional tolerance in manufacturing

* ISO 3029 Photography 126-size cartridges Dimensions of cartridge, film and backing paper [withdrawn 1999-03-18]

* ISO 3082 Iron ores Sampling and sample preparation procedures

* ISO 3098 Technical product documentation -- Lettering -- Part 0: General requirements

* ISO 3103 Method of brewing tea for the purpose of sensory tests

* ISO 3166 Codes for the representation of names of countries and their subdivisions

o ISO 3166-1 Part 1: Country codes

o ISO 3166-2 Part 2: Country subdivision code

o ISO 3166-3 Part 3: Code for formerly used names of countries

* ISO 3297 International standard serial number (ISSN)

* ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners

* ISO 3536 Road vehicles Safety glazing materials Vocabulary

* ISO 3537 Road vehicles Safety glazing materials Mechanical tests

* ISO 3538 Road vehicles Safety glazing materials Method for the determination of solar transmittance

 

* ISO 3601 Fluid power systems O-rings

o ISO 3601-1 Inside diameters, cross-sections, tolerances and size identification code (Recently updated)

o ISO 3601-2 Housing dimensions for general applications (Recently updated)

o ISO 3601-4 Anti-extrusion rings (back-up rings) (Recently updated)

* ISO 3602 Romanization of Japanese

* ISO 3632 Quality of Saffron

* ISO 3635:1981 Size designation of clothes Definitions and body measurement procedure

* ISO 3864 Safety labels

* ISO 3901 International Standard Recording Code (ISRC)

* ISO 3977 Design and procurement standards for gas turbine system applications

* ISO 4074: Natural latex rubber condoms -- Requirements and test methods

* ISO 4157 Subdivision of construction works

o ISO 4157-1: buildings and part of buildings

o ISO 4157-2: room numbers

o ISO 4157-3: room identifiers

* ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines Cement mortar lining

* ISO 4217 Currency codes

* ISO 4628 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance

o ISO 4628-1 : General introduction and designation system

o ISO 4628-3 : Assessment of degree of rusting

* ISO/IEC 4873:1991 8-bit code for information interchange

* ISO 4892 Plastics -- Methods of exposure to laboratory light sources

* ISO 5127 Information and documentation Vocabulary

* ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full

o ISO 5167-1 Part 1: General principles and requirements

o ISO 5167-2 Part 2: Orifice plates

o ISO 5167-3 Part 3: Nozzles and Venturi nozzles

o ISO 5167-4 Part 4: Venturi tubes

* ISO 5218 Representation of human sexes

* ISO 5455 Technical drawings: scales

* ISO 5457 Technical product documentation -- Sizes and layout of drawing sheets

* ISO 5775 Bicycle tires and rims

* ISO 5800 Photography Colour negative films for still photography Determination of ISO speed

* ISO 5964 Guidelines for the Establishment and Development of Multilingual Thesauri

* ISO 5971:1981 Size designation of clothes Pantyhose

* ISO 6166 Securities and related financial instruments International securities identification numbering system (ISIN)

* ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements

o ISO 6194-5 Identification of visual imperfections

* ISO 6344 Coated abrasives Grain size analysis

o ISO 6344-1 Part 1: Grain size distribution test

o ISO 6344-2 Part 2: Determination of grain size distribution of macrogrits P12 to P220

o ISO 6344-3 Part 3: Determination of grain size distribution of microgrits P240 to P2500

* ISO 6336 Calculation of load capacity of spur and helical gears

* ISO 6429 Information technology: Control functions for coded character sets

* ISO 6438 Documentation African coded character set for bibliographic information interchange

* ISO 6579 Microbiological detection of Salmonella spp in food and animal feeding stuffs

* ISO 6594 Cast iron drainage pipes and fittings Spigot series

* ISO 6709 Standard representation of latitude, longitude and altitude for geographic point locations

* ISO 6946 Building components and building elements Thermal resistance and thermal transmittance Calculation method

* ISO 7001 Graphical symbols Public information symbols

* ISO 7002 Agricultural food products Layout for a standard method of sampling from a lot

* ISO 7098 Romanization of Chinese

* ISO 7200 Technical product documentation - Data fields in title blocks and document headers

* ISO 7240 Fire detection and alarm systems

* ISO 7372 Trade data interchange

* ISO/IEC 7501-1:1997 Identification cards Machine readable travel documents (Part 1: Machine readable passport; Part 2: Machine readable visa; Part 3: Machine readable official travel documents)

* ISO 7736 Car radio installation space

* ISO/IEC 7810 Identification cards Physical characteristics

* ISO/IEC 7811 Identification cards Recording technique

* ISO/IEC 7812 Identification cards Identification of issuers

* ISO/IEC 7813 Information technology Identification cards Financial transaction cards

* ISO/IEC 7816 Identification cards Integrated circuit cards

* ISO/IEC 7942 Graphical Kernel System

* ISO 8000 Data quality

* ISO 8090 Cycles Terminology

* ISO 8180 Ductile iron pipelines Polyethylene sleeving for site application

* ISO 8373 Manipulating industrial robots Vocabulary

* ISO 8402 Quality Management and Quality Assurance Vocabulary

* ISO 8501-1 Preparation of steel substrates before application of paints and related products

* ISO 8554 Hardware for furniture Terms for furniture locks [withdrawn, 1999-11-11]

* ISO 8555 Hardware for furniture Terms for furniture fittings

* ISO 8559:1989 Garment construction and anthropometric surveys Body dimensions

* ISO 8583 Financial transaction card originated messages Interchange message specifications

o ISO 8583-1 Part 1: Messages, data elements and code values

o ISO 8583-2 Part 2: Application and registration procedures for Institution Identification Codes (IIC)

o ISO 8583-3 Part 3: Maintenance procedures for messages, data elements and code values

* ISO 8601 Data elements and interchange formats Information interchange Representation of dates and times

* ISO/IEC 8613 Open Document Architecture

* ISO/IEC 8632 Computer Graphics Metafile

* ISO 8651 Graphical Kernel System language bindings

* ISO/IEC 8652: Information technology Programming languages Ada

* ISO 8653:1986 Jewellery Ring-sizes Definition, measurement and designation

* ISO 8691 Petroleum products Low levels of vanadium in liquid fuels Determination by flameless atomic absorption spectrometry after ashing

* ISO 8805 Graphical Kernel System for Three Dimensions and the C language bindings are ISO 8806

* ISO 8806-4 Graphical Kernel System for Three Dimensions, C language bindings

* ISO 8807: Language Of Temporal Ordering Specification (LOTOS)

* ISO/IEC 8824 Abstract Syntax Notation One (ASN.1)

* ISO/IEC 8825 ASN.1 Encoding Rules

* ISO 8859 8-bit coded character sets

o ISO 8859-1 Latin-1

o ISO 8859-2 Latin-2

o ISO 8859-3 Latin-3 or "South European"

o ISO 8859-4 Latin-4 or "North European"

o ISO 8859-5 Cyrillic

o ISO 8859-6 Arabic

o ISO 8859-7 Greek

o ISO 8859-8 Hebrew

o ISO 8859-9 Latin-5

o ISO 8859-10 Latin-6, rearrangement of 8859-4

o ISO 8859-11 Thai

o ISO 8859-13 Latin-7 or "Baltic Rim"

o ISO 8859-14 Latin-8 or "Celtic"

o ISO 8859-15 Latin-9, revision of 8859-1

o ISO 8859-16 Latin-10 South-Eastern European languages and others

* ISO 8879 Standard Generalized Markup Language (SGML)

* ISO 9000 Quality management system in production environments

* ISO 9001 Quality management

* ISO 9069 SGML support facilities SGML Document Interchange Format (SDIF)

* ISO/IEC 9075 SQL

* ISO/IEC 9126 Software engineering Product quality

* ISO 9141 Network interconnection of computers in a vehicle

o ISO 9141-2 OBD-II standard, aka 9141 CARB standard

* ISO 9241 Ergonomic requirements for office work with visual display terminals

* ISO 9362 Bank Identifier Code or BIC system

* ISO 9407 Shoe sizes Mondopoint system of sizing and marking

* ISO/IEC 9541 Information technology Font information interchange

o ISO/IEC 9541-1:1991 Information technology Font information interchange Part 1: Architecture

o ISO/IEC 9541-2:1991 Information technology Font information interchange Part 2: Interchange Format

o ISO/IEC 9541-3:1994 Information technology Font information interchange Part 3: Glyph shape representation

* ISO 9564 Banking Personal Identification Number management and security

* ISO/IEC 9579 Remote database access for SQL

* ISO 9592, ISO 9593 PHIGS (Programmer's Hierarchical Interactive Graphics System)

* ISO/IEC 9594 Information technology Open Systems Interconnection The Directory

* ISO 9660 Information processing Volume and file structure of CD-ROM for information interchange

* ISO/IEC 9796 Information technology Security techniques Digital signature schemes giving message recovery

* ISO/IEC 9797 Information technology Security techniques Message Authentication Codes (MACs)

* ISO/IEC 9798 Information technology Security techniques Entity authentication

* ISO/IEC 9834 Information technology Open Systems Interconnection Procedures for the operation of OSI Registration Authorities

* ISO 9869 Thermal insulation Building elements In-situ measurements of thermal resistance and thermal transmittance

* ISO 9899 C programming language

* ISO/IEC 9945 Portable Operating System Interface (POSIX)

* ISO 9984 Conversion of Georgian characters into Roman characters

* ISO 9985 Conversion of Armenian characters into Roman characters

* ISO 9992:1999 Financial transaction cards Security architecture of financial transaction systems using integrated circuit cards

* ISO/IEC 9995 Information technology Keyboard layouts for text and office systems

* ISO 9999 Technical aids for persons with disabilities. Classification and terminology

 

ISO 10000 ISO 19999

* ISO 10006 Quality management Guidelines to quality in project management

* ISO 10007 Quality management Guidelines for configuration management

* ISO 10012 Measurement management systems Requirements for measurement processes and measuring equipment

* ISO/IEC 10021 Message Oriented Text Interchange Systems (MOTIS)

* ISO/IEC 10026 Open Systems Interconnection

* ISO 10077 Thermal performance of windows, doors and shutters Calculation of thermal transmittance

* ISO/IEC 10089 Information technology; 130 mm rewritable optical disk cartridge for information interchange 650 MB per cartridge

* ISO 10160 Information and documentation Open Systems Interconnection Interlibrary Loan Application Service Definition

* ISO 10161 Information and documentation Open Systems Interconnection Interlibrary Loan Application Protocol Specification

* ISO/IEC 10164 Information technology Open Systems Interconnection Systems Management

* ISO/IEC 10179:1996 Document Style Semantics and Specification Language (DSSSL)

* ISO 10202:1991 Financial transaction cards Security architecture of financial transaction systems using integrated circuit cards

* ISO 10206 Extended Pascal (programming language)

* ISO 10211 Thermal bridges in building construction Heat flows and surface temperatures Detailed calculations

* ISO 10279 BASIC programming language

* ISO 10303 Industrial automation systems and integration Product data representation and exchange. Known as STEP, Standard for the Exchange of Product data

* ISO 10383 Securities and related financial instruments Codes for exchanges and market identification (MIC)

* ISO 10487 Connections for passenger car stereos

* ISO 10628 Flow diagrams for process plants

* ISO 10646 Universal Character Set (equivalent to Unicode's character set)

* ISO 10664 Hexalobular internal driving feature for bolts and screws Torx screw head

* ISO 10957 Information and documentation International Standard Music Number (ISMN)

* ISO 10962 Securities and related financial instruments Classification of Financial Instruments (CFI code)

* ISO 10993 Biological evaluation of medical devices

o ISO 10993-1 Evaluation and testing within a risk management process

o ISO 10993-2 Animal welfare requirements

o ISO 10993-3 Tests for genotoxicity, carcinogenicity and reproductive toxicity

o ISO 10993-4 Selection of tests for interactions with blood

o ISO 10993-5 Tests for in vitro cytotoxicity

o ISO 10993-6 Tests for local effects after implantation

o ISO 10993-7 Ethylene oxide sterilization residuals

o ISO 10993-8 Selection and qualification of reference materials for biological tests [withdrawn 2003-12-15]

o ISO 10993-9 Framework for identification and quantification of potential degradation products

o ISO 10993-10 Tests for irritation and skin sensitization

o ISO 10993-11 Tests for systemic toxicity

o ISO 10993-12 Sample preparation and reference materials

o ISO 10993-13 Identification and quantification of degradation products from polymeric medical devices

o ISO 10993-14 Identification and quantification of degradation products from ceramics

o ISO 10993-15 Identification and quantification of degradation products from metals and alloys

o ISO 10993-16 Toxicokinetic study design for degradation products and leachables

o ISO 10993-17 Establishment of allowable limits for leachable substances

o ISO 10993-18 Chemical characterization of materials

o ISO 10993-19 Physico-chemical, morphological and topographical characterization of materials

o ISO 10993-20 Principles and methods for immunotoxicology testing of medical devices

* ISO 11064 Ergonomic design of control centres

o ISO 11064-1:2000 Part 1: Principles for the design of control centres

o ISO 11064-2:2000 Part 2: Principles for the arrangement of control suites

o ISO 11064-3:1999 Part 3: Control room layout ISO 11064-3:1999/Cor 1:2002

o ISO 11064-4:2004 Part 4: Layout and dimensions of workstations

o ISO 11064-5:2008 Part 5: Displays and controls

o ISO 11064-6:2005 Part 6: Environmental requirements for control centres

o ISO 11064-7:2006 Part 7: Principles for the evaluation of control centres

* ISO/IEC 11172 MPEG-1

* ISO 11170:2003 Hydraulic fluid power Filter elements Sequence of tests for verifying performance characteristics

* ISO/IEC 11179 Information Technology Metadata Registries (MDR)

o ISO/IEC 11179-1:2004 Part 1: Framework

o ISO/IEC 11179-2:2005 Part 2: Classification

o ISO/IEC 11179-3:2003 Part 3: Registry metamodel and basic attributes

o ISO/IEC 11179-4:2004 Part 4: Formulation of data definitions

o ISO/IEC 11179-5:2005 Part 5: Naming and identification principles

o ISO/IEC 11179-6:2005 Part 6: Registration

* ISO 11180 Postal addressing [Withdrawn, 2004-01-15]

* ISO/IEC 11404:1996 Language-independent datatypes (See also General purpose datatypes)

* ISO 11446:2004 Connectors for the electrical connection of towing and towed vehicles 13-pole connectors for vehicles with 12 V nominal supply voltage

* ISO 11469:2000 Plastics Generic identification and marking of plastics products

* ISO 11521 Replaced by ISO 15022

* ISO/IEC 11578:1996 Information technology Open Systems Interconnection Remote procedure call (RPC)

* ISO 11783 aka. IsoBus J1939-based communication protocol for the agriculture industry

* ISO/IEC 11801 Information technology Generic cabling for customer premises

* ISO 11898 Road vehicles Controller area network (CAN)

* ISO 12006 Building construction. Organization of information about construction works

* ISO 12207 Software lifecycle processes

* ISO 12639 Graphic technology Prepress digital data exchange Tag image file format for image technology (TIFF/IT)

* ISO 12641 Graphic technology Prepress digital data exchange Colour targets for input scanner calibration

* ISO 13239 High-level data link control (HDLC) procedures

* ISO/IEC 13249 SQL multimedia and application packages

* ISO/IEC 13250 Topic map

* ISO 13346 Volume and file structure of write-once and rewritable media, on which UDF is based

* ISO 13370 Thermal performance of buildings Heat transfer via the ground Calculation methods

* ISO 13406 Ergonomic requirements for work with visual displays based on flat panels

o ISO 13406-1:1999 Part 1: Introduction

o ISO 13406-2:1002 Part 2: Ergonomic requirements for flat panel displays

* ISO 13407:1999 Human-centred design processes for interactive systems

* ISO 13450 110 film format

* ISO 13485:2003 Medical Devices Quality management systems Requirements for regulatory purposes

* ISO 13490 Information technology: Volume and file structure of read-only and write-once compact disk media for information interchange

* ISO 13567/1 to 3 Technical product documentation; Organization and naming of layers for Computer-aided design (CAD)

* ISO/IEC 13568:2002 Information Technology Z Formal Specification Notation Syntax, Type System and Semantics

* ISO 13616 Financial services International bank account number (IBAN)

* ISO 13628 - Design And Operation Of Subsea Production Systems

o ISO 13628-1 - Part 1: General Requirements And Recommendations

o ISO 13628-2 - Part 2: Unbonded Flexible Pipe Systems For Subsea And Marine

o ISO 13628-3 - Part 3: Through flowline (TFL) systems

o ISO 13628-4 - Part 4: Subsea wellhead and tree equipment

o ISO 13628-5 - Part 5: Subsea Umbilicals

o ISO 13628-6 - Part 6: Subsea Production Control Systems

o ISO 13628-7 - Part 7: Completion/workover Riser Systems

o ISO 13628-8 - Part 8: Remotely Operated Vehicle (rov) Interfaces On Subsea

o ISO 13628-9 - Part 9: Remotely Operated Tool (rot) Intervention Systems

o ISO 13628-10 - Part 10: Specification For Bonded Flexible Pipe

o ISO 13628-11 - Part 11: Flexible Pipe Systems for Subsea and Marine Applications

* ISO 13849-1 Safety of machinery, Safety related parts of control systems, General principles for design

* ISO/IEC 13818 MPEG-2

* ISO 13837 Road vehicles Safety glazing materials Method for the determination of solar transmittance

* ISO 14000 Environmental Management Standards in production environments

* ISO 14001 Environmental Management

* ISO 14064 Greenhouse Gases

* ISO 14223 Radiofrequency [sic] identification of animals Advanced transponders

* ISO 14230 Road vehicles Diagnostic systems Keyword Protocol 2000

o ISO 14230-1 Physical layer

o ISO 14230-2 Data link layer

o ISO 14230-3 Application layer

o ISO 14230-4 Requirements for emission-related systems

* ISO/IEC 14443 Identification cards Contactless integrated circuit(s) cards Proximity cards

* ISO/IEC 14496 MPEG-4

* ISO 14644 Standards Cleanrooms and associated controlled environments

o ISO 14644-1:1999 Classification of Air Cleanliness

o ISO 14644-2:2000 Testing and Monitoring to prove Compliance

o ISO 14644-3:2005 Metrology & Test Methods

o ISO 14644-4:2001 Design, Construction and Start-up

o ISO 14644-5:2004 Operations

o ISO 14644-6:2007 Vocabulary

o ISO 14644-7:2004 Separative Devices

o ISO 14644-8:2006 Classification of Airborne Molecular Contamination

o ISO 14644-9 Clean Surfaces

* ISO 14651 Information technology: International string ordering and comparison

* ISO 14698 Standards

o ISO-14698-1 Bio-contamination Control General Principles

o ISO-14698-2 Evaluation & Interpretation of Bio-contamination Data

* ISO 14750 Information technology Open Distributed Processing Interface Definition Language

* ISO/IEC 14755 Input methods to enter unicode characters from ISO/IEC 10646

* ISO 14855-1:2005 Aerobic Biodegradation under controlled composting conditions

* ISO 14855-2:2007 Aerobic Biodegradation under controlled composting conditions with gravimetric measurement of carbon dioxid

* ISO/IEC 14882 Programming Languages C++

* ISO 14915 Software ergonomics for multimedia user interfaces

o ISO 14915-1:2002 Part 1: Design principles and framework

o ISO 14915-2:2003 Part 2: Multimedia navigation and control

o ISO 14915-3:2002 Part 3: Media selection and combination

* ISO 14971:2007 Medical Devices Application Of Risk Management To Medical Devices

* ISO/IEC 14977 Extended Backus-Naur Form (EBNF)

* ISO 15000 Electronic business eXtensible Markup Language ebXML

o ISO 15000-1:2004 Part 1: Collaboration-protocol profile and agreement specification (ebCPP)

o ISO 15000-2:2004 Part 2: Message service specification (ebMS)

o ISO 15000-3:2004 Part 3: Registry information model specification (ebRIM)

o ISO 15000-4:2004 Part 4: Registry services specification (ebRS)

o ISO 15000-5:2005 Part 5: ebXML Core Components Technical Specification, Version 2.01(ebCCTS)

* ISO 15022 Securities: Scheme for messages(Data Field Dictionary)

* ISO 15082 Road vehicles Tests for rigid plastic safety glazing materials

* ISO 15099 Thermal performance of windows, doors and shading devices Detailed calculations

* ISO 15112 Natural gas Energy determination

* ISO 15189 Medical laboratories Particular requirements for quality and competence

* ISO 15288 Systems engineering System life cycle processes

* ISO 15289 Systems and software engineering Content of systems and software life cycle process information products (Documentation)

* ISO/IEC 15291: Information technology Programming languages Ada Semantic Interface Specification (ASIS)

* ISO 15403 Natural gas Natural gas for use as a compressed fuel for vehicles

o ISO 15403-1 Designation of the quality

* ISO/IEC 15408 Common Criteria Evaluation Criteria for Information Technology Security

* ISO/IEC 15434 Information technology Automatic Identification and Data Capture Techniques - Syntax for High-Capacity ADC Media. For example: Data Matrix 2D barcode

* ISO/IEC 15444 JPEG 2000

* ISO/IEC 15445:2000 ISO HTML, a subset of Hypertext Markup Language (HTML) 4

* ISO/IEC 15504 Framework for the assessment of software processes, also known as SPICE (Software Process Improvement and Capability Determination)

* ISO 15614-13:2002 Specification and qualification of welding procedures for metallic materials-Welding procedure test

* ISO 15686 Service life planning for constructive works in 10 parts

* ISO/IEC 15693 Identification cards Contactless integrated circuit(s) cards Vicinity cards

* ISO 15706 International Standard Audiovisual Number

* ISO 15707 International Standard Musical Work Code

* ISO 15836 The Dublin Core metadata element set

* ISO 15897 Standard for the registration of new POSIX locales and POSIX charmaps

* ISO 15924 Codes for the representation of names of scripts

* ISO 15930 Graphic technology Prepress digital data exchange using PDF

* ISO/IEC 15948:2003 Portable Network Graphics (PNG)

* ISO 15970 Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor

* ISO 15971 Natural gas. Measurement of properties. Calorific value and Wobbe index

* ISO/IEC 16500 Generic Digital Audio-Visual Systems DAVIC

* ISO 16071:2003 Ergonomics of human-system interaction, Guidance on accessibility for human-computer interfaces

* ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines

* ISO 16232 Road vehicles Cleanliness of components of fluid circuits

o ISO 16232-8 Particle nature determination by microscopic analysis

o ISO 16232-9 Particle sizing and counting by automatic light extinction particle counter

o ISO 16232-10 Expression of results

* ISO/IEC 16262 ECMAScript

* ISO 16549 Textiles Unevenness of textile strands Capacitance method

* ISO 16750 Road vehicles Environmental conditions and testing for electrical and electronics equipment

* ISO/TS 16949 Quality management systems Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations

* ISO 16982:2002 Ergonomics of human-system interaction, Usability methods supporting human-centred design

* ISO/IEC 17020:1998 General criteria for the operation of various types of bodies performing inspection

* ISO/IEC 17024:2003 specifies requirements for a body certifying persons against specific requirements, including the development and maintenance of a certification scheme for personnel

* ISO/IEC 17025 General requirements for competence of test and calibration laboratories

* ISO 17202 Textiles Determination of twist in single spun yarns Untwist/retwist method

* ISO 17776 : Petroleum industries

* ISO/IEC 17799 Information technology: Code of practice for information security management

* ISO/IEC 17894 Ships and marine technology Computer applications General principles for development and use of PES in marine applications

* ISO/IEC 18000 Information Technology AIDC Techniques-RFID (Radio Frequency Identification) for Item Management Air Interface

o 18000-1 Part 1 Generic Parameters for the Air Interface for Globally Accepted Frequencies

o 18000-2 Part 2 Parameters for Air Interface Communications below 135 kHz

o 18000-3 Part 3 Parameters for Air Interface Communications at 13.56 MHz

o 18000-4 Part 4 Parameters for Air Interface Communications at 2.45 GHz

o 18000-5 Part 5 Parameters for Air Interface Communications at 5.8 GHz (Withdrawn)

o 18000-6 Part 6 Parameters for Air Interface Communications at 860 to 960 MHz

o 18000-7 Part 7 Parameters for Air Interface Communications at 433 MHz

* ISO/IEC 18004: QR Code Standardization

* ISO/IEC 18009: Information technology Programming languages Ada: Conformity assessment of a language processor (ACATS)

* ISO/IEC 18013 Information technology Personal Identification ISO-compliant driving license

o ISO/IEC 18013-1:2005(E) Part 1: Physical characteristics and basic data set

o ISO/IEC 18013-2:2008(E) Part 2: Machine-readable technologies

o ISO/IEC 18013-3:2009(E) Part 3: Access control, authentication and integrity validation

* ISO/IEC 18014 Information technology Security techniques Time-stamping services

* ISO/IEC 18023:2006(E) Information technology SEDRIS

o ISO/IEC 18023-1:2006(E) Information technology SEDRIS Part 1: Functional specification

o ISO/IEC 18023-2:2006(E) Information technology SEDRIS Part 2: Abstract transmittal format

o ISO/IEC 18023-3:2006(E) Information technology SEDRIS Part 3: Transmittal format binary encoding

* ISO/IEC 18024-4:2006(E) Information technology SEDRIS language bindings Part 4: C

* ISO/IEC 18025:2005(E) Information technology Environmental Data Coding Specification (EDCS)

* ISO/IEC 18026:2006(E) Information technology Spatial Reference Model (SRM)

* ISO/IEC 18033 Information technology Security techniques Encryption algorithms

o Part 1: General

o Part 2: Asymmetric ciphers

o Part 3: Block ciphers

o Part 4: Stream ciphers

* ISO/IEC 18041-4:2005(E) Information technology EDCS language bindings Part 4: C

* ISO/IEC 18042-4:2006(E) Information technology Spatial Reference Model (SRM) language bindings Part 4: C

* ISO/IEC 18092 Information technology Telecommunications and information exchange between systems Near Field Communication Interface and Protocol (NFCIP-1)

* ISO 18152:2003 Ergonomics of human-system interaction, Specification for the process assessment of human-system issues

* ISO 18185: Wireless standard for electronic seals using active RFID (Radio Frequency Identification)

* ISO 18245 standard concerning the assignment of Merchant Category Codes (MCC) in retail financial services

* ISO 18529:2000 Ergonomics of human-system interaction, Human-centred lifecycle process descriptions (available in English only)

* ISO 18629 standardized Process Specification Language (PSL)

* ISO 19005 Document management Electronic document file format for long-term preservation

* ISO 19011 standard providing guidelines for quality and environmental management systems auditing

* ISO 19092-1 Financial Services Security Part 1: Security framework

* ISO 19092-2 Financial Services Security Part 2: Message syntax and cryptographic requirements

* ISO 19101 Geographic Information: Reference model

* ISO 19105 Geographic Information: Conformance and testing

* ISO 19107 Geographic Information: Spatial schema

* ISO 19108 Geographic Information: Temporal schema

* ISO 19109 Geographic Information: Rules for Application Schema

* ISO 19110 Geographic Information: Feature cataloguing methodology

* ISO 19111 Geographic Information: Spatial referencing by coordinates

* ISO 19111 Geographic Information: Spatial referencing by identifier

* ISO 19113 Geographic Information: Quality principles

* ISO 19114 Geographic Information: Quality evaluation procedures

* ISO 19115 Geographic Information: Metadata

* ISO 19123 Geographic Information: Coverage schema

* ISO 19128 Geographic Information: Web Map Service

* ISO 19131 Geographic Information: Data product specification

* ISO 19136 Geographic Information: Geography Markup Language

* ISO 19439 Framework for enterprise modelling

* ISO 19440 Constructs for enterprise modelling

* ISO/IEC 19501 Unified Modeling Language (UML)

* ISO/IEC 19502 Meta-Object Facility (MOF)

* ISO/IEC 19503 XML Metadata Interchange (XMI)

* ISO/IEC 19757 Document Schema Definition Languages (DSDL)

o ISO/IEC FDIC 19757-2 Regular-grammar-based validation RELAX NG

o ISO/IEC 19757-3 Rule-based validation Schematron

o ISO/IEC 19757-4 Namespace-based Validation Dispatching Language (NVDL)

* ISO/IEC 19770 Information technology Software asset management

* ISO/IEC 19785 Common Biometric Exchange Formats Framework (CBEFF 2.0)

* ISO/IEC 19790 Security requirements for cryptographic modules (see also FIPS 140)

* ISO/IEC 19794 Information technology Biometric data interchange formats

o ISO/IEC 19794-1:2006 Part 1: Framework

o ISO/IEC 19794-2:2005 Part 2: Finger minutiae data

o ISO/IEC 19794-3:2006 Part 3: Finger pattern spectral data

o ISO/IEC 19794-4:2005 Part 4: Finger image data

o ISO/IEC 19794-5:2005 Part 5: Face image data

o ISO/IEC 19794-6:2005 Part 6: Iris image data

o ISO/IEC 19794-7:2007 Part 7: Signature/sign time series data

o ISO/IEC 19794-8:2006 Part 8: Finger pattern skeletal data

o ISO/IEC 19794-9:2007 Part 9: Vascular image data

o ISO/IEC 19794-10:2007 Part 10: Hand geometry silhouette data

 

ISO 20000 ISO 29999

* ISO/IEC 20000:2005 IT Service Management System (based on BS15000)

* ISO 20022 Financial Services universal financial industry message scheme

* ISO/IEC TR 20943 Information technology Procedures for achieving metadata registry content consistency

o ISO/IEC TR 20943-1:2003 Part 1: Data elements

o ISO/IEC TR 20943-3:2004 Part 3: Value domains

* ISO/IEC 21000 Information technology -- Multimedia framework (MPEG-21)

* ISO/IEC 21481 Information technology Telecommunications and information exchange between systems Near Field Communication Interface and Protocol -2 (NFCIP-2)

* ISO 21482 Ionizing-radiation warning -- Supplementary symbol

* ISO 22000 Food safety management systems Requirements for any organization in the food chain

o ISO/TS 22003 Food safety management systems Requirements for bodies providing audit and certification of food safety management systems

* ISO 22093 Industrial automation systems and integration -- Physical device control -- Dimensional Measuring Interface Standard (DMIS)

* ISO 22241 : Diesel engines NOx reduction agent AUS 32

o ISO 22241-1 : Quality requirements

o ISO 22241-2 : Test methods

o ISO 22241-3 : Handling, transportation and storing

* ISO/IEC TR 22250 Regular Language description for XML (RELAX)

o ISO/IEC TR 22250-1:2002 RELAX Core

* ISO/PAS 22399:2007 Social security Guideline for incident preparedness and operational continuity management

* ISO 22716:2007: Cosmetics Good Manufacturing Practices (GMP) Guidelines on Good Manufacturing Practices

* ISO/IEC 23003-1 : MPEG Surround (aka MPEG-D)

* ISO/IEC 23270:2003 C# programming language

* ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1 (in publication as of 2005-12)

o ISO/IEC 23360-1 Part 1: Generic specification

o ISO/IEC 23360-2 Part 2: Specification for IA32 architecture

o ISO/IEC 23360-3 Part 3: Specification for IA64 architecture

o ISO/IEC 23360-4 Part 4: Specification for AMD64 architecture

o ISO/IEC 23360-5 Part 5: Specification for PPC32 architecture

o ISO/IEC 23360-6 Part 6: Specification for PPC64 architecture

o ISO/IEC 23360-7 Part 7: Specification for S390 architecture

o ISO/IEC 23360-8 Part 8: Specification for S390X architecture

* ISO 23733 Textiles Chenille yarns Test method for the determination of linear density

* ISO 23950 Library standard ANSI/NISO Z39.50 Protocol for searching and retrieving information, usually from bibliographic records

* ISO/IEC 24707:2007 Information technology Common Logic (CL): a framework for a family of logic-based languages

* ISO/IEC 24727 Identification cards Integrated circuit card programming interfaces

o ISO/IEC 24727-1 Part 1: Architecture

o ISO/IEC 24727-2 Part 2: Generic card interface

o ISO/IEC 24727-3 Part 3: Application interface

o ISO/IEC 24727-4 Part 4: Application programming interface (API) administration

o ISO/IEC CD 24727-5 Part 5: Testing

o ISO/IEC FCD 24727-6 Part 6: Registration authority procedures for the authentication protocols for interoperability

* ISO/IEC 24744:2007 Software Engineering Metamodel for Development Methodologies

* ISO/IEC 24762:2008 Information technology Security techniques Guidelines for information and communications technology disaster recovery services

* ISO/IEC DIS 25961 Recommended Practice for Architectural Description of Software-Intensive Systems. See IEEE 1471

* ISO 26000 Guidance on social responsibility

* ISO/IEC 26300 OpenDocument Format (ODF)

* ISO/IEC 27000-series Information security management system family of standards

o ISO/IEC 27000 Information security management systems Overview and vocabulary

o ISO/IEC 27001 Information security management systems Requirements

o ISO/IEC 27002 Code of practice for information security management

o ISO/IEC 27003 Information security management system implementation guidance

o ISO/IEC 27004 Information security management Measurement

o ISO/IEC 27005 Information security risk management

o ISO/IEC 27006 Requirements for bodies providing audit and certification of information security management systems

o ISO/IEC 27007 Guidelines for information security management systems auditing

o ISO/IEC 27011 Information security management guidelines for telecommunications organizations based on ISO/IEC 27002

* ISO/PAS 28000 - Specification for security management systems for the supply chain

o ISO/PAS 28004 - Guidelines for the implementation of ISO/PAS 28000

* ISO/IEC 29119 Software Testing[4]

o ISO/IEC 29119-1 Part 1: Concepts & Vocabulary

o ISO/IEC 29119-2 Part 2: Test Process

o ISO/IEC 29119-3 Part 3: Test Documentation

o ISO/IEC 29119-4 Part 4: Test Techniques

* ISO/IEC 29500 Office Open XML

o ISO/IEC 29500-1 Part 1: Fundamentals and Markup Language Reference

o ISO/IEC 29500-2 Part 2: Open Packaging Conventions

o ISO/IEC 29500-3 Part 3: Markup Compatibility and Extensibility

o ISO/IEC 29500-4 Part 4: Transitional Migration Features

ISO 30000 ISO 39999

* ISO 31000 Risk management

* ISO 32000 Document management Portable document format

* ISO/IEC 38500 Corporate governance of information technology

ISO 80000

* ISO/IEC 80000 Quantities and units